home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19971216-19980424
/
000027_news@newsmaster….columbia.edu _Mon Dec 29 21:40:50 1997.msg
< prev
next >
Wrap
Internet Message Format
|
1998-04-22
|
2KB
Return-Path: <news@newsmaster.cc.columbia.edu>
Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30])
by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id VAA14976
for <kermit.misc@watsun.cc.columbia.edu>; Mon, 29 Dec 1997 21:40:50 -0500 (EST)
Received: (from news@localhost)
by newsmaster.cc.columbia.edu (8.8.5/8.8.5) id VAA24403
for kermit.misc@watsun; Mon, 29 Dec 1997 21:40:49 -0500 (EST)
Path: news.columbia.edu!sol.ctr.columbia.edu!news.indiana.edu!vixen.cso.uiuc.edu!logbridge.uoregon.edu!newsfeed.direct.ca!Supernews60!supernews.com!news1.hk.linkage.net!news.hk.linkage.net!vega.hkstar.com!hkstar2!news@hkstar.com
From: "hh" <hhop@hkstar.com>
Newsgroups: comp.protocols.kermit.misc
Subject: problem found after using a 3COM 100MbTX hubs
Date: 30 Dec 1997 02:04:21 GMT
Organization: Hong Kong Star Internet Ltd.
Lines: 25
Message-ID: <01bd14c7$77882360$04000050@mis-1>
NNTP-Posting-Host: ip-50-74.dialup.hkstar.com
X-Newsreader: Microsoft Internet News 4.70.1155
Xref: news.columbia.edu comp.protocols.kermit.misc:8192
We using kermit to connect our unix host for a lot of years. We found that
it is quite good for us by using kermit to be a terminal emulator. We
have a HP817S unix host, a Novell server and a NT server, and using
ethernet to connect all the workstation and servers. Each workstation are
using ODI driver to connect all the servers. We have on problems on this
configuration.
We now want to change to a fast ethernet configuration which is the
combination of 3com 3C905TX network card and 3com OfficeConnect 3c16720
hubs.
After set up all the connection, we can access our novell server and the
NT server.
However we can't connect to the unix host through kermit 3.4 . A message
say that "can't arp the address xxx.xxx.xxx.xxx, host may be shutdown or
disconnected".
Then, we try to use Novell Lan Work Place to connect the host and found
that it works. So, we sure that our tcp/ip setup is correct.
Is there any problems in the new network card or hubs?
If yes, any pacth or driver can fix this?
If not, pls suggest method to fix this problem?
Best Regards,